BedSlide Classic Sliding Truck Bed Tray Installation - 2023 Chevrolet Silverado 1500- Video
Hi, everyone. Aiden here with etrailer. Today, we're gonna be taking a look at and showing you how to install this Bedslide on your 2023 Chevrolet Silverado 1500. That's gonna be a great way to access your cargo, whether you've got a camper shell or a tonneau cover. And this is going to be a sliding tray capable of holding up to a thousand pounds, having two locking positions. And when it's all said and done, pushing all the way back inside of your truck bed where no one can see it, and all of your stuff remains easy to access without having to open up that tonneau cover or crawl into the back of your camper shell. more
9/14/2023 8:02:22 AM
CargoGlide 1000 Sliding Tray for Trucks Installation - 2016 Ford F-150- Video
Today on our 2016 Ford F-150, we're going to be taking a look at and installing the Cargo Glide 1000 sliding tray for trucks with a 1,000-pound capacity, part number CG1000-9548. Here's what this cargo glide is going to look like once it's installed in the bed of the truck. What this is going to allow you to do is make it much easier to access gear or equipment that's in the bed of your truck. Just by simply pulling this handle, you can pull out on this cargo glide and get much easier access to what's in the bed of your truck. This cargo glide is going to do a good job of filling up a lot of your bed space in your eight-foot beds from up at the cab all the way to the back here at the tailgate, but giving you enough room to make sure that there's peace of mind that it won't hit when you close your tailgate. You can see here there's adequate clearance between the back of our cargo glide and the face of our tailgate. We've got good clearance here along the front at the bulkhead, as well. As you can see here, when you need to secure any gear or cargo down, it comes with four convenient eyelets that you can use in order to do that, and these eyelets, you can loosen up and secure anywhere along the inside tracks of this cargo glide. more
11/22/2016 1:11:09 PM
CargoGlide 1500XL Sliding Tray Installation - 2009 Dodge Ram- Video
Today we will be installing our Cargoglide Sliding Tray on our 2009 Dodge Ram Quad Cab, part number cg1500xl-7548. To begin with you will want to clean the bed of your truck out. Next, youll want to position the cargo slider in the bed of the truck and youll want to center it between the wheel wells, as well as setting it about a half inch from the front of the bed. You will want to get the help of at least three other friends to help you set this unit into the bed of your truck. You will notice that the feet on this particular unit all bolt on the outside of the rails, and all of the locations are on the top section of the bed rib. Now that you see where the bolts will be drilled through, youll want to look under the bed and make sure there will be nothing in the way when you drill through. more
5/20/2013 9:26:59 AM
CargoGlide Sliding Tray Installation - 2009 Dodge Ram- Video
All right, today on this 2009 Dodge Ram pickup, we'll be installing part number CG1000-7548, from CargoGlide. First thing we're going to do is go ahead and take the assembly and go ahead and place it into the body of the pickup. We'll go ahead and put it into place and make sure we have it centered from left to right, and front to rear. You want to keep it at least a half inch away from everything around the bed of the truck. Once we have it centered the way we want it, we'll go ahead and slide it back. We'll pull back on the lash, then pull back on the cargo bed itself, leaving the frame in the bed of the pickup. more
4/19/2013 3:17:01 PM
